Sensors

Sea-Bird Scientific HydroCAT

Add to budget
Imagen de: Sea-Bird Scientific HydroCAT

For longterm water quality monitoring with proven anti-fouling technology

Sensor de eficacia demostrada en campo que mide la conductividad, la temperatura, la presión y el oxígeno disuelto óptico. HydroCAT puede recoger datos de alta calidad a lo largo de hasta un año en función de la aplicación. Cuenta con una protección excelente contra la bioincrustación gracias al sistema antiincrustante aprobado por la US-EPA con bomba integral y paso de flujo interno exclusivo que proporciona mediciones estables durante la intervención.
  • Instalación fija
  • Temperatura, nivel/profundidad, oxígeno disuelto, conductividad
  • Idóneo para intervenciones prolongadas en ambientes remotos y biológicamente ricos
  • SDI-12, RS-232, RS-485 (optional)
Measured Parameters
Conductivity
Range 0 … 70 mS/cm (0 … 70,000 µS/cm)
Accuracy ± 0.003 mS/cm (3 µS/cm)
Typical Stability 0.003 mS/cm (3 µS/cm) per month
Resolution 0.0001 mS/cm (0.1 µS/cm)
Temperature
Range -5 … 45°C
Accuracy ± 0.002°C / ± 0.01°C (over 35°C)
Typical Stability 0.0002°C per month
Resolution 0.0001°C
Pressure
Range 0 … 20 m/ 0 … 100 m/ 0 … 350 m
Accuracy ± 0.1% of full scale range
Typical Stability 0.05% of full scale range
Resolution 0.002% of full scale range
Optical Dissolved Oxygen
Range 120% of surface saturation in all natural waters
Accuracy ± 0.1 mg/L (3 µmol/kg) or ± 2% whichever is greater
Typical Stability < 0.03 mg/L (1 µmol/kg)/100,000 samples (20°C)
Resolution 0.007 mg/L (0.2 µmol/kg)
Electrical
Clock Stability 5 seconds/month
Acquisition Time 2.3 … 3.2 seconds/sample (see manual)
Power Supply
Internal 7.8 Amp-hour (nominal) battery pack, 257 Kjoules (derated for calculations)
Optional External Power 0.25 Amps at 9 … 24 VDC
Power Consumption(all with pressure) *
Quiescent 0.0004 Watts
CTD-DO Sample Acquisition (excluding pump): Real-time data enabled – 0.17 Watts
No real-time data – 0.155 Watts
CTD-DO Sample Waiting (not sampling, pump running, excluding pump): Real-time data enabled – 0.056 Watts if receive line valid,
0.016 Watts if receive line not valid
No real-time data – 0.016 Watts
CTD-DO Between Samples Real-time data enabled – 0.056 Watts if receive line valid
0.0004 Watts if receive line not valid
No real-time data – 0.0004 Watts
Pump 0.12 Watts
Communications 0.065 Watts
* Power consumption values are for standard RS-232 interface; for optional interfaces, see corresponding manual.
General
Housing Material Plastic
Depth Rating 350 m (1148 ft)
Weight 3.4 kg (7.5 lbs) in air, 1.5 kg (3.3 lbs) in water
Imagen de Sea-Bird Scientific HydroCAT
Imagen de Sea-Bird Scientific HydroCAT
Imagen de Sea-Bird Scientific HydroCAT

Contact us

If you are thinking of carrying out a project, would like to purchase any instrumentation type or would like more information about DILUS services, please leave your contact information. The team will contact you as soon as possible.Sea-Bird Scientific HydroCAT, leave your details. The team will contact you as soon as possible.



    Controller: DILUS INSTRUMENTACIÓN Y SISTEMAS S.A.
    Purpose: Collection of personal data to be able to respond to your request
    Legal Basis: Consent of the data subject
    Recipients: No data will be transferred to third parties, except when legally required and except to entities collaborating with DILUS INSTRUMENTACIÓN Y SISTEMAS S.A. for the provision of services and the correct management of the entity. In such cases, data will only be used for purposes and uses strictly necessary for the development of their activity and for which their services were required, and they may not use the data for any other purpose
    Rights: Access, rectify, or delete data, as well as other rights, as explained in the additional information in the privacy policy