For longterm water quality monitoring with proven anti-fouling technology
Sensor de eficacia demostrada en campo que mide la conductividad, la temperatura, la presión y el oxígeno disuelto óptico. HydroCAT puede recoger datos de alta calidad a lo largo de hasta un año en función de la aplicación. Cuenta con una protección excelente contra la bioincrustación gracias al sistema antiincrustante aprobado por la US-EPA con bomba integral y paso de flujo interno exclusivo que proporciona mediciones estables durante la intervención.
- Instalación fija
- Temperatura, nivel/profundidad, oxígeno disuelto, conductividad
- Idóneo para intervenciones prolongadas en ambientes remotos y biológicamente ricos
- SDI-12, RS-232, RS-485 (optional)
| Measured Parameters | |
| Conductivity | |
| Range | 0 … 70 mS/cm (0 … 70,000 µS/cm) |
| Accuracy | ± 0.003 mS/cm (3 µS/cm) |
| Typical Stability | 0.003 mS/cm (3 µS/cm) per month |
| Resolution | 0.0001 mS/cm (0.1 µS/cm) |
| Temperature | |
| Range | -5 … 45°C |
| Accuracy | ± 0.002°C / ± 0.01°C (over 35°C) |
| Typical Stability | 0.0002°C per month |
| Resolution | 0.0001°C |
| Pressure | |
| Range | 0 … 20 m/ 0 … 100 m/ 0 … 350 m |
| Accuracy | ± 0.1% of full scale range |
| Typical Stability | 0.05% of full scale range |
| Resolution | 0.002% of full scale range |
| Optical Dissolved Oxygen | |
| Range | 120% of surface saturation in all natural waters |
| Accuracy | ± 0.1 mg/L (3 µmol/kg) or ± 2% whichever is greater |
| Typical Stability | < 0.03 mg/L (1 µmol/kg)/100,000 samples (20°C) |
| Resolution | 0.007 mg/L (0.2 µmol/kg) |
| Electrical | |
| Clock Stability | 5 seconds/month |
| Acquisition Time | 2.3 … 3.2 seconds/sample (see manual) |
| Power Supply | |
| Internal | 7.8 Amp-hour (nominal) battery pack, 257 Kjoules (derated for calculations) |
| Optional External Power | 0.25 Amps at 9 … 24 VDC |
| Power Consumption(all with pressure) * | |
| Quiescent | 0.0004 Watts |
| CTD-DO Sample Acquisition (excluding pump): | Real-time data enabled – 0.17 Watts No real-time data – 0.155 Watts |
| CTD-DO Sample Waiting (not sampling, pump running, excluding pump): | Real-time data enabled – 0.056 Watts if receive line valid, 0.016 Watts if receive line not valid No real-time data – 0.016 Watts |
| CTD-DO Between Samples | Real-time data enabled – 0.056 Watts if receive line valid 0.0004 Watts if receive line not valid No real-time data – 0.0004 Watts |
| Pump | 0.12 Watts |
| Communications | 0.065 Watts |
| * Power consumption values are for standard RS-232 interface; for optional interfaces, see corresponding manual. | |
| General | |
| Housing Material | Plastic |
| Depth Rating | 350 m (1148 ft) |
| Weight | 3.4 kg (7.5 lbs) in air, 1.5 kg (3.3 lbs) in water |
Contáctenos
Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre Sea-Bird Scientific HydroCAT, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.