SP Lite2 Pyranometer
SP Lite2 is designed for routine measurement of solar radiation.
It is especially designed for Photovoltaic / solar energy module monitoring.
SP Lite2 can be used under all weather conditions. The sensor measures the solar energy received from the entire hemisphere. It is ideal for measuring available energy for use in solar energy applications, plant growth, thermal convection and evapotranspiration.
SP Lite2 uses a photodiode detector, which creates a voltage output that is proportional to the incoming radiation. Also due to the unique design of the diffuser, its sensitivity is proportional to the cosine of the angle of incidence of the incoming radiation, allowing for accurate and consistent measurements.
SP Lite2 is easy to use. It can be directly connected to voltmeter or data logger. Direct readout in Watts per square meter (W/m²) can be derived from the measured voltage divided by the calibration coefficient. It is fitted with the Kipp & Zonen high quality yellow cable.
SP Lite2 features adjustment screws and a bubble level integrated in the mounting flange for your convenience. A threaded hole in the body of the housing takes our accessory screw-in mounting rod. Two instruments can easily be bolted back-to-back amd fitted with a mounting rod to make a simple albedometer.
|Spectral range (overall)||400 to 1100 nm|
|Sensitivity||60 to 100 µV/W/m²|
|Response time SP Lite2 (95%)||< 500 ns|
|Directional response (up to 80° with 1000 W/m² beam)||< 10 W/m²|
|Temperature response SP Lite2||< -0.15 % / °C|
|Operational temperature range||-40 °C to +80 °C|
|Maximum solar irradiance||2000 W/m²|
|Field of view|
If you are thinking of carrying out a project, would like to purchase any instrumentation type or would like more information about DILUS services, please leave your contact information. The team will contact you as soon as possible.SP Lite2 Pyranometer, leave your details. The team will contact you as soon as possible.