Sensors

SMP3 Pyranometer

Add to budget
Imagen de: SMP3 Pyranometer
  • ISO 9060 spectrally flat Class C 
  • 0 to 1 Volt or 4 to 20 mA analogue output
  • No change of desiccant for 10 years
  • Active temperature correction from -40°C to +80°C
  • 5 year warranty

SMP3 Pyranometer

The SMP3 is a smart pyranometer with low maintenance and industry standard digital and analogue amplified outputs. Based on the proven CMP 3 technology the SMP3 adds Modbus® interface, improved response time and temperature corrected measurement data. The wide and low power supply range from 5 to 30 VDC makes integration in meteorological stations easy. The SMP is protected against over voltage, reversed polarity and short circuiting. Because all SMP’s have identical sensitivity and connections exchanging instruments during recalibration is easy.

SmartExplorer Windows™ for data logging, display of data and Modbus® address setting is provided as standard.

SMP3 measures global solar radiation on a horizontal plane. When tilted with the same angle as a PV panel it measures the tilted global radiation, for PV module efficiency calculations.

Specifications

Spectral range (50% points) 300 to 2800 nm
Response time (63%) < 1.5 s
Response time (95%) < 12 s
Zero offset A < 15 W/m²
Zero offset B < 5 W/m²
Directional response (up to 80° with 1000 W/m² beam) 20 W/m²
Temperature dependence of sensitivity (-20 ºC to +50 ºC) < 3 %
Analogue output (-V version) 0 to 1 V
Analogue output (-A version) 4 to 20 mA
Digital output
Imagen de SMP3 Pyranometer
Imagen de SMP3 Pyranometer
Imagen de SMP3 Pyranometer
Imagen de SMP3 Pyranometer
Imagen de SMP3 Pyranometer

Contact us

If you are thinking of carrying out a project, would like to purchase any instrumentation type or would like more information about DILUS services, please leave your contact information. The team will contact you as soon as possible.SMP3 Pyranometer, leave your details. The team will contact you as soon as possible.



    Controller: DILUS INSTRUMENTACIÓN Y SISTEMAS S.A.
    Purpose: Collection of personal data to be able to respond to your request
    Legal Basis: Consent of the data subject
    Recipients: No data will be transferred to third parties, except when legally required and except to entities collaborating with DILUS INSTRUMENTACIÓN Y SISTEMAS S.A. for the provision of services and the correct management of the entity. In such cases, data will only be used for purposes and uses strictly necessary for the development of their activity and for which their services were required, and they may not use the data for any other purpose
    Rights: Access, rectify, or delete data, as well as other rights, as explained in the additional information in the privacy policy