New class of Smart Weather Sensors with high-quality aluminum housing: WS3100 Climate Reference Sensor for Calibration / Verification of Air Temperature, Relative Humidity, Air Pressure and Solar Radiation
Relative humidity is measured by means of a heated capacitive sensor element; a precision PT100 measuring element is used to measure air temperature. A resonant pressure transducer is employed for precise pressure measurement. Due to the integrated Kipp & Zonen CMP10 pyranometer, global radiation values are in a secondary standard quality.
Accuracy in detail:
- Temperature better than +/- 0.1°C
- Relative Humidity better than +/- 2%
- Air Pressure better than +/- 0.1 hPa
- Solar Radiation better than 5% W/m2 (secondary standard)
Measurement output can be accessed by the following protocolls: UMB-Binary, UMB-ASCII, UMB-ASCII 2.0, SDI-12 and NMEA.
- Temperature, relative humidity, air pressure (redundant pressure as option), global radiation
- PT100/Temp, Capacitive/RH, MEMS Resonant Pressure transducer, Kipp&Zonen CMP10 / radiation
- Metal housing with ventilated radiation shield temperature/humidity measurements, Traceable accuracy, Modular architecture, Drift-free sensing technologies, Easy maintenance & calibration possibilities, CMP10 Secondary Standard Kipp & Zonen Pyranometer, WiFi module
- RS485, 2-wire, half-duplex/WiFi
- 8391.U01
| General | |
| Dimensions | Ø ca. 250 mm, height approx. 470 mm |
| Weight | Approx. 5 kg |
| Interface | RS485, 2 – wire, half – duplex/WiFi |
| Power consumption | 24 VDC/typical 4W |
| Operating temperature | -40…60 °C (optional -60 °C) |
| Operating rel. humidity | 0…100 % RH |
| Protection level housing | IP66 |
| Global radiation | |
| Principle | Pyranometer |
| Unit | W/m² |
| Response time | < 5s |
| Zero offset A | < 7W/m² |
| Zero offset B | < 2W/m² |
| Neigungsfehler bei 1000 W/m² | < 0.2% |
| Temperature sensivity dependence | < 1% (-10°C…40°C) |
| Spectral range (50% points) | 285… 2.800nm |
| Measurement range | 4000W/m² |
| Temperature | |
| Principle | PT100 |
| Measuring range | -40 … 60 °C |
| Unit | °C |
| Accuracy | ±0.1 °C |
| Resolution | 0.01 °C |
| Relative humidity | |
| Principle | Capacitive |
| Measuring range | 0 … 100 % RH |
| Unit | % RH |
| Accuracy | ±2 % RH |
| Resolution | 0.1 % RH |
| Air pressure | |
| Principle | MEMS Resonant Pressure transducer |
| Measuring range | 300 … 1100 hPa |
| Unit | hPa |
| Accuracy | ±0.1 hPa |
| Resolution | 0.01 hPa |
Contáctenos
Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre WS3100-UMB Reference Weather Sensor, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.