Mecánicos

Wind Transmitter First Class Advanced X 4.3352.00.4xx

Añadir al presupuesto
Imagen de: Wind Transmitter First Class Advanced X 4.3352.00.4xx

Part number: 4.3352.00.4xx
The wind transmitter is designed for the acquisition of the horizontal component of the wind velocity in the field of meteorology and environ- mental measuring technology, evaluation of location, and measurement of capacity characteristics of wind power systems. In the plain country the wind transmitter meets all requirements of IEC 61400-12-1 Edition 2.0 for an Instrument of the accuracy class 0.65.
Special characters are a defined and optimised, dynamic behaviour also at high turbulence intensity, minimal over-speeding, and a low starting value.
The measuring value is available at the output as digital signal and via RS485 interface. It can be transmitted to display instruments, recording instruments, data loggers as well as to process control systems. The serial interface supports the THIES- ASCII and the MODBUS RTU- format.
For winter operation the instrument (4.3352.00.400) is equipped with an electronically regulated heating, which guarantees a smooth running of the ball bearings, and prevents the shaft and slot from icing-up.

Specification

Part number: 4.3352.00.4xx

4.3352.00.000
Wind speed
Measuring range
0 … 75 m/s
Accuracy
< 1 % of meas. value (0.3 … 50 m/s)
or < ±0.2 m/s
Linearity
r > 0.99999 ( 4 … 20 m/s )
Inclined flow
< 0.1% ( mean deviation from cosinus line at12 m/s ; ±20 ° )
Delay distance
< 3 m ( aac. to ASTM D 5096-96 )
Air pressure
Measuring range
300 … 1100 hPa
Accuracy
±1 hPa @ 20 °C
Indication
Measuring range
-89.9 … +89.9 °
Accuracy
±1 °
Measuring axis
X, Y, Z
Vibration
Measuring range
0 … 50 Hz
Accuracy
±0.4 Hz
Measuring axis
X, Y, Z
Acceleration
Measuring range
±8 g
Accuracy
±30 mg
Data output digital
Interface
RS485
Baudrate
1200 … 57600 Baud
Duplex mode
Half duplex
Protocol
ASCII / MODBUS
Frequency
1082 Hz @ 50 m/s
Operating voltage
Electronic
3.7 … 42 V DC
40 mA typ.
100 mA max.
Heating
24 V AC/DC, max 25 W
General
Ambient temp.
-50 … +80 °C
Electr. connection
8 pol. plug connection
Mounting
onto mast tube Ø 1“
Protection
IP 55
Survival speed
80 m/s ( min. 30 minutes )
Weight
0.5 kg
Fixing boring
Ø 35 x 25 mm
Matirial housing
aluminium, anodised
Material cup star
carbon-fiber glass reinforced
Imagen de Wind Transmitter First Class Advanced X 4.3352.00.4xx

Contáctenos

Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre Wind Transmitter First Class Advanced X 4.3352.00.4xx, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.



    Dilus cumple al 100% con el Reglamento general de protección de datos (GDPR). Para obtener más información sobre cómo recopilamos, guardamos y procesamos su información privada de conformidad con GDPR, consulte nuestra política de privacidad. Esta política se actualizó por última vez en enero de 2020.