The BTD-200 Lightning Warning System is a complete detection and warning system which has been developed from the Biral range of professional, aviation grade lightning detection systems.
It reliably detects the local presence of all forms of lightning out to a range of 35km (22 miles) from the sensor.
Designed to be installed and set up by non-specialist contractors, it comes complete with a power supply for the detector and the essential PC application – Lightning Works – for monitoring and warning of approaching thunderstorms.
- Complete, out-of-the-box warning system with minimal installation. (Power and data cables available separately).
- Fully automatic alarm triggering
- Warns of the most dangerous (overhead) lightning risk even before the first lightning strike
- Advanced, automatic self-test to ensure system operation
- Accurate 35km (22miles) detection range
- Detects cloud-to-ground, intra-cloud and cloud-to-cloud lightning
- Detects charged precipitation and strong atmospheric electric fields
- Compliance with EN50536:2011+/A1:2012 for a Class 1 detector
- Performs in accordance with IEC62793 for a Class A detector
| Lightning Detection | Cloud-to-cloud, cloud-to-ground and intra-cloud lightning discharges |
|---|---|
| Thunderstorm activity for advanced warning of lightning | Charged precipitation and strong electric field |
| Lightning detection range | 35km (22 miles) |
| Range resolution | 1km |
| Detection efficiency | 95% for a single lightning flash |
| 99% for a storm with 2 lightning flashes | |
| 99.9% for storm with 3 lightning flashes | |
| For flashes within 35km | |
| False alarm rate | <2% |
| Maximum flash rate | 120 per minute |
| Maximum update rate | 2 seconds |
| OUTPUTS | |
| User computer or Base Control Box | Wired serial connection (RS422) |
| Wide Area Sounder | Wired Serial connection (RS485) |
| Relays | 3 Relays with volt free contacts. (Alert state, Warning state, Self-test). All relays 16Vac 35VDC 5A |
| Connection method | Screw terminals |
| POWER REQUIREMENTS | |
| Supply voltage | 9 to 30Vdc, 110/115 or 230/240Vac |
| Power consumption | Less than 5W |
| ENVIRONMENTAL | |
| Operating temperature | -20°C to +50°C |
| Relative humidity | 0 – 100% |
| Protection rating | IP66 |
| Wind speed | 60m/s |
| Altitude | -200m to 2,000m (-656ft to 6,561ft) |
| Shock and vibration | Land based fixed installation |
| Weight | 4.3kg (9.5lbs) Sensor only |
| CERTIFICATION & COMPLIANCE | CE Certified |
| EMC compliance with EN61326-1:2013 Industrial immunity, domestic emissions | |
| RoHS and WEE compliant | |
| Compliance with EN50536:2011+A1:2012 for a Class 1 detector | |
| Performs in accordance with IEC 62793 for a Class A detector | |
Documentos
Lightning Warning System Datasheet 
BTD-200 Industrial Applications
BTD-200 Leisure & Sport Applications
Lightning Works Client Setup Software
Lightning Works Server Setup Software
BTD-200 Sensor Firmware Update
BTD-200 System Firmware & Software Update Instructions
Contáctenos
Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre BTD-200 Lightning Warning System, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.