The airQrate multi-gas calibrator provides accurate concentrations of calibration gases such as ozone, sulphur dioxide, nitrogen oxide, nitrogen dioxide, and other gases required.
The airQrate generates gases for zero and span calibration. An automatic multi-point calibration is available as well. Calibrations may be performed in transfer mode or absolute mode.
The modular design enables a user-defined calibrator configuration in relation to the respective application.
Modular components include the dilution module and the permeation module. Up to two permeation ovens may be installed or upgraded.
The airQrate may either be operated in a laboratory using 230V or in the field using 12V (here, power supply may be provided by a vehicle, for example). A large touch screen enables easy operation.
Ethernet connectivity and RS-232 interface provide remote operation.
When calibrating in the field, bulky gas cylinders become redundant due to the internal zero air generator, the permeation ovens, and the optional internal gas cylinders (1l).
Flow repeatability: ±0.1% FS
Linearity of mass flow measurements: ±0.5 % FS
Dilution air flow: 0-5 SLPM
Gas cylinder flow: 0-50 SCCM
Calibration gas inlet: 1
Dilution gas inlet: 1
Physical specifications
Analogue test channel: 8 x 10V (12-bit)
Digital outputs: 4 x Open Collector
Digital inputs: 6 x TTL
Temperature: 0-40 °C
Dimensions: 42.5 cm W x 21.9 cm H x 58.4 cm D
Weight: 23 kg (26 kg for 220/240VAC)
Power supply: 220/240VAC; 12V
Contáctenos
Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre airQrate Multi-Gas Calibrator *airQrate*, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.