Sensors

Model 1001 Zero Air Source

Add to budget
Imagen de: Model 1001 Zero Air Source

The Model 1001 Zero Air Source is designed to meet the requirements of clean, dry air for dilution calibrators, purge air for permeation tube ovens, supply air for test chambers and pollutant free air for other laboratory or environmental applications. Equipped with dual coalescent filters and a permeation drier, moisture removal is enabled automatically using adjustable control circuitry or manual purging from the front panel. Additionally, upon completion of calibration, the air source can be controlled automatically by a Sabio dilution calibrator or remotely by contact closure or when installed on demand with an internal pressure switch. Air pollutants are removed using reusable dual rear mounted scrubber canisters for NO, NO2, O3, SO2, H2S. Other pollutants such as carbon monoxide (CO) or hydrocarbons (HC) can be removed with an internal oxidizer. Both types of internal oxidizers come equipped with front panel mounted temperature controllers which monitor and control the temperature for optimum performance.

Air Quality
Standard Unit:  NO, NO2, O3, SO2, H2S, < 0.1 ppb
Standard unit with CO catalytic Oxidize:  NO, NO2, O3, SO2, H2S, < 0.1 ppb, CO < 0.03 ppm
Standard unit with HC catalytic oxidize: NO, NO2, O3, SO2, H2S, < 0.1 ppb, CO < 0.03 ppm, & HC < 0.2 ppb

Mechanical
Model 1001 Rack Mount Unit: H: 8.75 in. (22.2 cm) | W: 16.2 in. (41.2 cm) | D:22.25in. (56.5cm) | Average Weight: 55-65 lbs. (25-30 kg) 

Dew Point
-20°C up to 15 slpm

Electrical
Standard: 120 VAC 60 Hz, 470 VA operation
Optional: 240 VAC, 50 Hz, 340 VA operation 

Imagen de Model 1001 Zero Air Source

Contact us

If you are thinking of carrying out a project, would like to purchase any instrumentation type or would like more information about DILUS services, please leave your contact information. The team will contact you as soon as possible.Model 1001 Zero Air Source, leave your details. The team will contact you as soon as possible.



    Controller: DILUS INSTRUMENTACIÓN Y SISTEMAS S.A.
    Purpose: Collection of personal data to be able to respond to your request
    Legal Basis: Consent of the data subject
    Recipients: No data will be transferred to third parties, except when legally required and except to entities collaborating with DILUS INSTRUMENTACIÓN Y SISTEMAS S.A. for the provision of services and the correct management of the entity. In such cases, data will only be used for purposes and uses strictly necessary for the development of their activity and for which their services were required, and they may not use the data for any other purpose
    Rights: Access, rectify, or delete data, as well as other rights, as explained in the additional information in the privacy policy