Sensors

CMP11 Pyranometer

Add to budget
Imagen de: CMP11 Pyranometer
  • ISO 9060 spectrally flat Class A 
  • Excellent linearity
  • Fast response time
  • Low tilt error
  • 5 year warranty

CMP11 Pyranometer

CMP11 uses the temperature compensated detector technology originally developed for the CMP22 and is a step up in performance from the CMP6. It is particularly suitable for meteorological networks and the reduced response time of 1.66 seconds (63%) meets the requirements for solar energy applications.

A waterproof socket is fitted for the signature yellow signal cable, which is available in a range of lengths pre-wired to the waterproof plug.

The integral bubble level is raised to the top of the housing and can be viewed without removing the redesigned snap-on sun shield, which also covers the connector. The connector with gold-plated contacts allows for easy exchange and re-calibration. The screw-in drying cartridge is easy to remove and the replacement desiccant is supplied in convenient refill packets.

The pyranometer does not require any power, it supplies a low voltage of 0 to 20 mV in relation to the amount of incoming radiation. When a higher voltage level or a 4 to 20 mA signal is required, the AMPBOX is the perfect solution.

Specifications

Spectral range (50% points) 285 to 2800 nm
Sensitivity 7 to 14 µV/W/m²
Response time < 5 s
Zero offset A < 7 W/m²
Zero offset B < 2 W/m²
Directional response (up to 80° with 1000 W/m² beam) < 10 W/m²
Temperature dependence of sensitivity (-10 ºC to +40 ºC) < 1 %
Operational temperature range -40 °C to +80 °C
Maximum solar irradiance 4000 W/m²
Field of view 180 °
Imagen de CMP11 Pyranometer
Imagen de CMP11 Pyranometer
Imagen de CMP11 Pyranometer
Imagen de CMP11 Pyranometer
Imagen de CMP11 Pyranometer

Contact us

If you are thinking of carrying out a project, would like to purchase any instrumentation type or would like more information about DILUS services, please leave your contact information. The team will contact you as soon as possible.CMP11 Pyranometer, leave your details. The team will contact you as soon as possible.



    Controller: DILUS INSTRUMENTACIÓN Y SISTEMAS S.A.
    Purpose: Collection of personal data to be able to respond to your request
    Legal Basis: Consent of the data subject
    Recipients: No data will be transferred to third parties, except when legally required and except to entities collaborating with DILUS INSTRUMENTACIÓN Y SISTEMAS S.A. for the provision of services and the correct management of the entity. In such cases, data will only be used for purposes and uses strictly necessary for the development of their activity and for which their services were required, and they may not use the data for any other purpose
    Rights: Access, rectify, or delete data, as well as other rights, as explained in the additional information in the privacy policy