Ultrasónicos

Ultrasonic Anemometer WP

Añadir al presupuesto
Imagen de: Ultrasonic Anemometer WP

It has been developed especially for the application in harsh environments, and is eminently
suited for the use on wind power plants thanks to the compact construction and low weight.
The serial or analogue output of the data occurs optionally as instantaneous value or as moving average value with settable time frame.
If necessary, the instrument is automatically heated at critical ambient temperatures. The risk of malfunction by freezing is thus minimized. The ultrasonic transducers are heated, as well as all essential housing components.

Specification

Part number: 4.388x.xx.xxx

4.3880.xx.xxx (4)
Wind speed
Measuring range
0 … 75 m/s
Resolution
0.1 m/s (standard)
0.01 m/s (user defined)
Accuracy
±0.2 m/s rms ( < 5 m/s )
±2 % rms ( 5 … 50 m/s )
Wind direction
Measuring range
0 … 360 °
Resolution
1 °
1 ° (standard)
< 1 ° (user defined)
Accuracy
±2 ° @ 2 m/s < WS < 50 m/s
Virtual temp.
Measuring range
-40 … +70 °C
Resolution
0.1 K
Data output digital
Interface
RS485 / RS422
Baudrate
1200 … 921600 Baud
Data values
instant. values, average values
Output range
1 per 100 msec up to
1 per 50 sec
Status signals
heating, Meas section error, Temperature of meas section
Protocol
ASCII, MODBUS RTU, NMEA WV
Data output analog
Wind speed
0 … 20 mA
4 … 20 mA
0 … 10 V
2 … 10 V
Stromausgang
max. 500 Ω
Wind direction
0 … 20 mA
4 … 20 mA
0 … 10 V
2 … 10 V
Voltage output
min. 50 kΩ
Resolution
16 bit
Operating voltage
Electronic
8 … 40V DC or
12 … 28 V AC / 2.5 W
Heating
24 V AC/DC, typ 100 W
Heating
Heated compontents
base plate,
cover plate,
connecting pipes,
ultrasonic transducers
General
Bus operation
up to 98 sensors
Electr. connection
8 pol. connector
Housing
seawater-proof, stainless steel (V4A) and aluminium
Protection
IP 67
Dimension
Ø 100 mm x 120 mm
Imagen de Ultrasonic Anemometer WP

Contáctenos

Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre Ultrasonic Anemometer WP, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.



    Responsable: DILUS INSTRUMENTACIÓN Y SISTEMAS S.A.
    Finalidad: Recogida de datos personales para poder atender su solicitud
    Legitimación: Consentimiento del interesado
    Destinatarios: No se cederán datos a terceros, salvo obligación legal y salvo las entidades que colaboran con DILUS INSTRUMENTACIÓN Y SISTEMAS S.A. para la prestación de servicios y la correcta gestión de la entidad, en cuyo caso, solo con las finalidades y los usos exclusivamente necesarios para el desarrollo de su actividad y para el que fueron requeridos sus servicios, no pudiendo usar los mismos para un fin distinto
    Derechos: Acceder, rectificar o suprimir los datos, así como otros derechos, como se explica en la información adicional en la política de privacidad