Toma de Muestras


Añadir al presupuesto

Wind Tunnel Sampler Overview:

The Scentroid SW60 is the next generation of wind tunnel samplers (AKA ventilated sampling hoods), used for sampling on solid or liquid surfaces with passive odour emissions in accordance with both EN13725 and VDI3880. SW60 wind tunnel sampler offers a number of unique features that make it the most accurate and user-friendly area source sampler in the world.

Scentroid’s wind tunnel sampler is made of state-of-the-art PTFE coated aluminum composite material that is both extremely rigid and ultra-light. The wind tunnel only weighs 10 kg resulting in it being very easy to handle by a single technician. Despite being extremely light, the composite material makes the SW60 Wind Tunnel Sampler tough enough to withstand the toughest working conditions.

Continuous Air Speed Monitoring with the Wind Tunnel Sampler:

Scentroid SW60 wind tunnel sampler has a built-in anemometer, which remotely monitors the exact wind speed within the tunnel. Data is logged and shown on any mobile tablet or phone. This not only significantly increases the accuracy of odour sampling, but also provides a means of setting the airspeed to the exact desired value.

SW60 Wind Tunnel Sampler Operational Guide:

  • Connect the air supply to the wind tunnel
  • Connect wind tunnel to a tablet for airspeed measurements
  • Connect the vacuum chamber to the sample port
  • Adjust airspeed to the desired value
  • Acquire sample using the vacuum chamber

Sources for Sampling: Liquid or solid passive (non-ventilated) sources
Electronic Interface: Direct 3.5 mm jack
Wind Speed Range: 0.15 m/s to 1 m/s with 6″ air supply and 0.15 m/s with 4″ air supply
Battery Capacity: 1.5 hours
Charging Options: 12V DC car outlet, 100-240 volt AC power
Power Supply: 12V – 8Ah deep cycle rechargeable battery. Can also be operated directly from 12V auto power outlet.
Air Supply: Carbon filter, variable speed blower and flexible aluminum duct enclosed in a waterproof carrying case.
Standards: VDI 3880, EN13725, AS4323
Sample Port: 1/4″ 12 mm stainless steel compression fitting
Removable Floaters: PTFE coated aluminum
Wind Tunnel Material: PTFE coated aluminum composite
Dimensions: 167 cm x 23 cm x 33 cm without floaters installed 167 cm x 23 cm x 74 cm with floaters installed
Weight: 10 kg




Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre SW60 WIND TUNNEL SAMPLER, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.

    Dilus cumple al 100% con el Reglamento general de protección de datos (GDPR). Para obtener más información sobre cómo recopilamos, guardamos y procesamos su información privada de conformidad con GDPR, consulte nuestra política de privacidad. Esta política se actualizó por última vez en enero de 2020.