Sutron XLink 100/500 Logging Transmitter
Añadir al presupuesto
Multi-Sensor Input Logger with data transmission via lridium or Cellular
Sutron’s XLink product family offers a cost-effective Wi-Fi enabled datalogger with data transmission via Iridium or Cellular. Ideal for use with multiple digital and analog sensors supporting basic or advanced monitoring applications. The product comes in two models tailored to fit different application and budget requirements. The XLink 100 and XLink 500 carry over all the great capabilities from its predecessor family (CDMALink, HSPALink, GPRSLink, IridiumLink).
- USB-Host, RS-232, Cellular, Data Logger, RS-232 and RS-485, Switchable SDI-12 power, Iridium
- Plug and play modem, custom programming with Python Scripts (XLlink500), up to 32 measurements, log up to 1,000,000 readings, USB flash drive, secure communication (TLS 1.2 ciphers), multiple interfaces and protocols (HTTP,TCP/IP,FTP), and 3 levels of security to configure, perform maintenance or access data
- Yes
- SDI-12, RS-232, RS-485
| GENERAL INFORMATION | |
| Dimensions | |
| XLink500-1, XLink100-1 | Inches: 4.5 x 6.2 x 1.6 (cm: 11.4 x 15.8 x 4.1) |
| NEMA-4 (IP66) | Inches: 7.3 x 9.5 x 5.2 (cm: 18.5 x 24.2 x 13.2) |
| Weight (XLink500-1) | 1 lbs. (0.5 Kg) |
| IP rating | IP66 (NEMA variants) |
| Operating temperature | 40 °C to +70 °C (-40 °F to +158 °F) |
| Compliance | CE, FCC, ISED |
| _________________ | |
| POWER REQUIREMENTS | |
| Voltage | 9-2 0 VDC; 10-16 VDC for SDI-12 Compliance |
| Quiescent | < 1 mA typ. @12.5 VDC |
| SDI-12 (DEDICATED INTERFACE) | |
| Compliance | V1.3 data recorder |
| Power | 500 mA, short-circuit protected |
| _________________ | |
| ANALOG – SINGLE ENDED (XLink 500 ONLY) | |
| Number of inputs | 2 |
| Range* | 0-5V |
| Accuracy @ 25 °C | 0.04 % typ. FS |
| Resolution | 0.3 µV |
| _________________ | |
| ANALOG – DIFFERENTIAL (XLink 500 ONLY) | |
| Number of Inputs | 2 |
| Range* | ±39 mV, ±312 mV, ±2.5 V |
| Accuracy @ 25°C | 0.04 % typ. FS over 2.5 V |
| Resolution | 0.3 µV @ ±2.5 V scale |
| _________________ | |
| ANALOG – 4-20 mA (XLink 500 ONLY) | |
| Number of inputs | 1 |
| Range | 0-22 mA |
| Accuracy @ 25°C | 0.14 % FS |
| Load | Internal 200 ohms |
| _________________ | |
| DIGITAL – INPUTS/OUTPUTS | |
| Number of inputs | 2 |
| Input type | 0-15 V, optional low-level input Status, counter, frequency |
| Max input frequency | 10 KHz, optional debouncing, internal pull |
| Number of outputs | 1 |
| Output types | On/off/ pulse Open collector w/100 ohm limiting resistor. 100 mA, 15V max |
| _________________ | |
| OTHER INPUTS/OUTPUTS | |
| Precision analog reference (XLink 500 only) | 2 terminals, 2.5 V, 10.0 mA (total) |
| Switch 12V | 1A, 1 port, overloaded protected |
| Protected 12V (XLink 500 only) | 0.75 A, 1 port |
| RS-485 | 1 port; SDI-12, ModBus, custom communications with Python |
| RS-232 | DB9; terminal interface, User interface, ModBus, custom communications with Python |
| USB Device (Micro B) | 1 port; PC / MAC communication using Sutron’s LinkCOMM |
| USB Host (Type A) | 1 port; setup, firmware update, log download using a USB flash drive |
| Celluar Modem Global HSPA (3G) | |
| Frequency | 850 MHz; 1700 MHz; 1900 MHz Band |
| _________________ | |
| * | * Nominal. Guaranteed Analog Input Range Over Temperature Is 0–4.98 V, ± 2.49 V, ±311 mV, ±38.9 mV. |
Contáctenos
Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre Sutron XLink 100/500 Logging Transmitter, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.