Overview of SS600 Odor Laboratory:
Scentroid SS600 Odor Laboratory is the world’s most advanced stationary, dynamic, and fully automated olfactometer. It is capable of odor / odour measurement and analysis to all international olfactometry standards. To reduce testing time and ensure maximum lab efficiency the SS600 Odor Laboratory features 6 identical panellist stations for simultaneous odor / odour analysis. Each station is equipped with a Siemens touch screen for flexibility and ease of operation. Three (3) stainless steel sniffing ports at each station allow for true triangular odor / odour analysis.
The Siemens industrial control panel monitors and adjusts test parameters automatically to ensure optimal test conditions. Test results are instantaneously processed and displayed live to the test administrator on the dedicated 8″ touch-screen interface.
Admin:
Testing Modes: Triangular forced, binary forced, yes/no, direct presentation, hedonic tone, GB boundary, and GB test
Accuracy: Error less than 2% reading
Response Time: 0.2 s
Setting Time: <1s
Sample Delivery (Sniffing) Time: Adjustable
Required Sample Volume: Depends on test conditions selected; average 6 panelist test consumes 2 litres by using a 10s sniff time at 20 lpm
Calibration: Full feedback design does not require re-calibration
Power Requirements: 110VAC, 60Hz, 10 Amps or 220VAC/50Hz, 10 Amps
Standards: EN13725:2003, ASTM E679-04, NVN2820, VDI 3881, GB/T14675-93, AS 4323.3
Dilution:
Dilution Principle: Venturi vacuum pump using no moving parts to create a vacuum and draw out sample air
Control Mechanism of Volumetric Flow: Mass flow controllers on both clean air and sample intake. Uses full feedback to guarantee accurate dynamic dilution
Dilution Range: 2 to 2^16, with an optional 2 to 2^24 available
Dilution Steps: Selectable, unlimited steps between 2 and 2^16
Air Flow:
Presentation Flow Rate: Variable, 15 litres per minute to 30 litres per minute
Presentation Face Velocity: 0.25 m/s at 20 litres per minute
Air Supply: Oil-free compressor with water seperator, micro mist seperator, maintainance free drier and carbon filter enclosed in sound absorbing foam
Controls:
Control: Siemens PLC, for fully automated processes. Does not require a computer to operate
Computer Interface: Ethernet Network/USB
Display and Interface: Siemens industrial 8″ full colour touch screen for administrator and six Siemen’s 6″ industrial touch screens for panelists
Display Languages: English, Italian, French, German, Spanish, Chinese
Hardware:
Presentation Device: Stainless Steel Sniffing Ports
Tubing Material: Stainless Steel (316L electro-polished)
Wetted Surfaces: Stainless Steel (316L)
Table Material: All stainless steel construction to eliminate contamination
Data Processing:
Data Processing: Test Data including end-criteria and statistics processed formatted for quick and easy excel imports or other post data processing software
Data Transfer: USB mass storage device support for extraction and storage of data on any standard flash disk or USB HDD
Documentos
Contáctenos
Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre SS600 ODOR LABORATORY, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.