Instrumentación Calidad del Aire

SP50 OXIDIZATION PURGER

Añadir al presupuesto
Imagen de: SP50 OXIDIZATION PURGER

Oxidization Purger Overview:

The Scentroid SP50 Oxidisation Purger is a revolutionary device designed to provide effective and reliable cleaning solutions for olfactometers, sample bags, PTFE lines, and other equipment that may be contaminated by odours. The SP50 provides a mixture of clean air with oxidisation gases such as ozone and hydroxyl to effectively decontaminate sampling tedlar or teflon bags, sampling probes, or sampling lines. The mixture is injected, with the desired concentration to allow high levels of decontamination either, remaining contaminants, bacteria or fungus.

The SP50 has been built with safety in mind, the purger has a built in-carbon filter that scrubs and cleans the contaminated air coming from the equipment that is being cleaned such as bags or probes before it is released into the laboratory.

 

Benefits of Oxidization:

Oxidisation is a powerful tool for decontamination. Ozone has demonstrated its decontamination capabilities vs. formaldehyde for bio clean rooms, and high neutralizing effects for several pollutants.

Oxidization Purger Basics of Operation:

Mode 1: Continuous Ozone Injection: Used when the user wants a deeper cleaning of sample bags or probes

  • The operator sets the ozone concentration levels
  • The unit provides continuous ozone cleaned air for better decontamination

Mode 2: User Ozone Injection: Used to quickly clean reusable sample bags or probes

  • The operator sets the ozone concentration levels
  • The unit injects clean air in continuous mode and ozone with the user presses the “inject ozone” button
Features:

Concentration: Adjustable ozone concentration
Vacuum Power: High Vacuum, up to -0.95 atmospheric pressure
Cycle Time Setting: 1L to 50L sample bags
Injection: Selective ozone injection (continuous/user)
Ports: Built-in carbon filter on inlet and exhaust ports
Noise: Quiet operation

Imagen de SP50 OXIDIZATION PURGER

Contáctenos

Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre SP50 OXIDIZATION PURGER, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.



    Responsable: DILUS INSTRUMENTACIÓN Y SISTEMAS S.A.
    Finalidad: Recogida de datos personales para poder atender su solicitud
    Legitimación: Consentimiento del interesado
    Destinatarios: No se cederán datos a terceros, salvo obligación legal y salvo las entidades que colaboran con DILUS INSTRUMENTACIÓN Y SISTEMAS S.A. para la prestación de servicios y la correcta gestión de la entidad, en cuyo caso, solo con las finalidades y los usos exclusivamente necesarios para el desarrollo de su actividad y para el que fueron requeridos sus servicios, no pudiendo usar los mismos para un fin distinto
    Derechos: Acceder, rectificar o suprimir los datos, así como otros derechos, como se explica en la información adicional en la política de privacidad