The OTT measuring buoy is specially designed for operation in combination with the HYDROLAB HL7 or HL4 multiparameter sondes. It is equipped with a data acquisition and remote data transmission unit as well as a mains-independent solar power supply. Compared to conventional buoys, the multiparameter probe is mounted laterally in a pipe on the OTT measuring buoy. This eliminates the need to open the buoy during maintenance and calibration work, allowing tasks to be easily done from a small boat.To help reduce bio-fouling for longer maintenance intervals the HYDROLAB HL7 sonde is equipped with a central cleaning brush and a copper measuring cap.
Stand-alone water quality measurement buoy solution
Temperature, Conductivity, Depth, pH, Dissolved Oxygen (LDO), Turbidity, ORP, Blue-Green Algae, Chlorophyll a
Cellular
MB 1000
Diameter | approx. 1.050 mm |
Height of the buoy incl. radar reflector | approx. 2.000 mm |
Total weight | approx. 180 kg |
Construction steel plate (2 mm), hollows filled with 2K-PUR foam | |
Standard paint yellow | |
Incl. lid for an easy access to the electronic | |
Incl. 2 solar panels (12V/25W) | |
Incl. 3 solid anchor |
MB 1400
Diameter | approx. 1.400 mm |
Height of the buoy incl. radar reflector | approx. 2.200 mm |
Total weight | approx. 360 kg |
Construction steel plate (2 mm), | |
hollows filled with 2K-PUR foam | |
Standard paint yellow | |
Incl. lid for an easy access to the electronic | |
Incl. 3 solar panels (12V/25W) | |
Incl. 3 solid anchor bars) | |
Measured parameters: | Temperature, Conductivity, Depth, pH, Dissolved Oxygen (LDO), Turbidity, ORP, Blue-Green Algae, Chlorophyll |
Documentos
Contáctenos
Si está pensando en llevar a cabo un proyecto, desea adquirir instrumentación, quiere más información al respecto de los servicios de DILUS o desea mas información sobre OTT Water Quality Buoy, deje sus datos. El equipo se pondrá en contacto con usted a la mayor brevedad posible.